ALUMINIUM CHLOROHYDRATE (ACH) 23%
Product is Certified by NSF,USFDA, and HALAL
PRODUCT SPESIFICATIONS
PARAMETER | SPESIFICATION | |
Spesific Grafity (@ 20 0C) | Min. 1.33 – 1.35 | |
Alumina, Al2O3 (w/w) | Min. 23 % | |
Aluminum, Al | 12.2 – 12.7 % | |
Al : Cl Atomic Ratio | 1 – 2.10 : 1 | |
Basicity, % | Min. 83% | |
Chloride, % | 7.9 – 8.4 | |
pH, (30 % w/W) | 4.0 – 4.4 | |
Appearance | Clear to Slightly Hazy | |
Iron, mg/l | Max. 100 |
PACKAGING
• Flexy Bag : 24,000 kg
• IBC Tank : 1,330 kg
• Plastic Drum : 275 kg
APPLICATIONS & BENEFITS
Municipal & Industrial Water Treatments
Aluminum Chlorohydrate Solution is generally employed as the primary coagulant in potable water and industrial water treatment plants, replacing the need for other coagulants such as alum, and in many cases also eliminating or at least greatly reducing the need for pH adjustment chemicals, coagulant aids and filter aids.
ACH is often employed in an environment where the pH of the receiving stream is higher than 7.5.
Consistently recognized benefits of converting to Aluminum Chlorohydrate Solution are:
• Improved turbidity removal
• Improved color removal
• Increased TOC (Total Organic Carbon) removal
• Lower filter turbidities
• Increased filter run length
• Sludge reduction of over 50%
• Simplified operations by eliminating pH and secondary polyelectrolyte feed
• Lower overall treatment costs
Municipal & Industrial Waste Water Treatment
Aluminum Chlorohydrate Solution is also used in wastewater treatment applications for:
• TSS (Total Suspended Solids) removal
• Metals removal
• Phosphate removal
• COD (Chemical Oxygen Demand) reduction in industrial wastewater treatment
• BOD (Biological Oxygen Demand) and TOC (Total Organic Carbon) removal in municipal wastewater
Pulp & Paper (On – Machine Aplications)
Aluminum Chlorohydrate Solution is also used in several on machine applications as a:
• Size bonding agent
• Anionic trash scavenger
• Retention and drainage aid
• Pitch control additive
STORAGE & HANDLING
Storage tanks and piping for Aluminum Chlorohydrate Solutions should be constructed of materials recommended for corrosive products. FRP, PVC, HDPE and/or rubber are the materials of choice for piping and storage tanks.
Metering pumps and other equipment that comes in contact with concentrated solutions of Aluminum Chlorohydrate must also be constructed of acid resistant materials such as PVC, rubber, Teflon®, ceramic and Hastolly C®. No wetted parts should contain any metals such as carbon steel, stainless steel, brass or aluminum.
OTHER INFORMATION
Please Contact to this link Click Here